Vehicle Specific Remote Car Alarms w/Standard Type Remotes
SE Index: Marksman, Carbine 5900 Plus, Code Alarm Pro Series CA-100, Marksman X2 Extreme, X3 Extreme
X
All VSS Systems are Designed, Developed, Assembled and Shipped from our AutoAlarmPro.com facility in Michigan. Each VSS system is "Custom-Made-Per-Order".
Add-On Alarm that works using your
Factory Remote Keyless Entry
Vehicle Specific System
No Additional Parts Required
Works with Factory Remote Keyless Entry Systems
All Door Alarm Protection
Includes Siren or Vehicles Horn Choice: The system can be set-up to use a Siren (included at NXC if chosen) or the Vehicles' horn as a sounding device and easier installation. Choice provided before checkout.
Impact/Shock Sensor: Detect's high impacts made to the vehicle.
Included Silent Arm/Disarm Choice
Included Auto Lock/Unlock w/Ignition Choice: NOTE:Not Applicable to many vehicles. If this is something you must have, check with an AutoAlarmPro.com representative to see if this option is applicable to your vehicle before purchase.
Built-In Starter-Kill Anti-Theft Circuit
Optional Glass Break Detector
Optional Digital Tilt Sensor (Tire & Rim Protection)
For vehicles without power door locks or if only an alarm system is needed.
The CA-100 VSS Unit is available in virtually hundreds of different Vehicle Specific System platforms. The VSS platform provides a much faster & easier understood installation compared to the "universal" type systems offered today. A VSS platform eliminates the need to wire the system for the specific vehicle its going to be installed into and provides a VSS guide that indicates which wire from the system goes to what wire in the vehicle, where that wire is in the vehicle, and how to verify (test) it using the supplied test probe.
2 X Two Button Remote's Included
For Vehicles without Power Door Locks OR when Just an Alarm System is Desired.
Up to 300 Feet of Remote Control Range.
Automatically Arms & Disarms the alarm system with the systems remote.
All Door Protection: The system will trigger if any of the vehicles doors are opened.
External Starter-Kill/Anti Theft Circuit: Included. Installer option that will prevent the vehicle from being "hot-wired" or started with the vehicles keys if the alarm is triggered.
Built-In Shock Sensor: Detects Heavy impacts made to the vehicle that triggers the alarm system.
Flashing Parking Lights: The system will flash the vehicles parking lights whenever the systems remotes are used and when the alarm is triggered.
125 dbl Siren: Water Resistant Single Tone Siren.
Status LED: In Dash mounted LED that steadily flashes when the system is armed.
Panic Mode: The systems alarm can be triggered using one of the systems remotes.
Installer Programmable Active or Passive Arming w/Valet Mode Switch.
4 X Transmitter's Capability: The system can be controlled with up to 4 remotes at one time (Additional transmitters sold separately).
Extra Alarm Trigger Input: For adding on an additional external sensor or pin switch (Sold separately).
Extra Armed Output: For activating optional starter-kill relays or window roll-up modules (Sold separately).
Small System Control Module: New module design that practically fits in the palm of your hand. Great for mounting & hiding unit in tight under dash spaces.
VSS Set-Up for Your Specific Vehicle. You will be asked to indicate the Year, Make & Model of the vehicle you plan on installing this system on at checkout, along with a check-list of options that may pertain to your specific vehicle.
System-to-Vehicle Specific Installation Manual. Step-by-Step, wire to wire installation guide that indicates exactly what wire from the system goes to what wire in your vehicle, where that wire is located and how to verify it using the supplied test probe.
Complete Installation Kit: All the Connectors, Wiring, Hardware, Split-Loom etc. needed to Complete the Installation is Included: Any Relays, Diode's and/or Resistor's Needed for the Specific Vehicles Installation is Supplied and Pre-Wired In. Also included with every VSS order: An Air-Bag & Computer Safe LED Style Test Probe is also provided to assist you in verifying the needed wires in the Vehicle. Includes complete instructions on how to use it to verify each & every wire needed to connect to in the vehicle.
No Stripping & Splicing Required: The VSS systems "Quick-Connect" 3M T-Tap Process provides Fast, Clean & Insulated Connections from the System to the Vehicle using Just a Pair of Pliers! Faster & Easier than using a T-harness. Quicker and Safer than Soldering. Example Link
Installation Tech Support is available 7 days a week via telephone or email.
1 Year System Warranty:AutoAlarmPro.com will repair or replace each and every part of the system for 1 year. Product Warranty Assistance is easily requested and obtained by calling AutoAlarmPro.com at 1-586-203-8595 24 Hours a Day, 7 Days a Week and providing your purchase ORDER ID number.
VSS Vehicle Specific Remote Car Starters and Alarm Systems
"We're Wired for Your Vehicle" Website Mgt/Sales/Warranty Returns Office: 51072 Milano Dr. Unit 2
Macomb, Michigan 48042
Sales: 1-586-677-9580 Installation Tech Support: 1-586-203-8595 Toll Free Order Line:1-VSS-KIT-ORDR
M-Fri: 9am-6pm, Sat: 9am-3pm EST Sun:CLOSED
Fax: Provided Upon Request
*On a very few select american made vehicles (for example but not limited to: a few Buick's & Pontiac's) and many Imports (for example but not limited to: most Kia, Hyundai, Mitsubishi & Subaru vehicle's) a "NKR" (No Key Required) bypass kit is not available and a spare key to the vehicle will be required for operation of the supplied bypass kit (This applies to any brand of remote starter installation). Contact an AutoAlarmPro.com representative for details before purchase.
AutoAlarmPro.com does not guarantee, nor imply, that "anyone" can perform any required installation. A VSS system is stated "easier" to install due to the VSS designed platform and should not be misconstrued as an "easy" or "no-brainer", "anyone-can-do-it" interpretation or presentation.