Looking to install a DIY remote car starter system into your vehicle? Well, making sure that you have all the correct components and information needed to successfully install the system into your specific vehicle can be somewhat confusing and time consuming, and many of the extra components you'll need are sold separately with standard kit's. One way to eliminate this necessity is with the purchase of a vehicle specific kit from AutoAlarmPro.com:
A do-it-yourself vehicle specific ready kit from AutoAlarmPro.com will provide the all the parts and installation information needed to install the system into the exact year, make and model of vehicle the system is ordered for. No separate purchase of a bypass, interface kit, relays, connector's, wiring guides or even a test probe are needed, its all included in each VSS kit. You will have all the mandatory parts and information needed to install and provide the features and functions detailed under each VSS systems offer and applicable to your specific vehicle.
You will be asked to indicate the Year, Make & Model of vehicle you are ordering the system for during checkout, then one of our technicians will verify your order and e-mail you within 1 business day to confirm that we have a VSS kit available for your specific vehicle. With over 500+ different vehicle specifically designed systems, odds are we have a VSS kit available for your vehicle!
CA-4053 VSS Vehicle Specific Ready Remote Starter System: Complete Kit. No Additional Parts Required.
DIY Step-By-Step, System-to-Vehicle Installation Manual: A concise step-by-step diy installation manual that will guide you through exactly what wire from the system connects to what wire in the vehicle, where the wire is located in the vehicle and how to confirm that you found the correct wire using the VSS kits supplied test probe.
Vehicle Specific Anti-Theft Key Bypass Interface: Includes any required vehicle specific bypass interface kit that basically makes a copy of one of your vehicles keys so there's no need to give up one of your keys or purchase a third key to install the system. Our brand of bypass interface kits do not (and cannot) permanently "bypass" a vehicles anti-theft system, they directly communicate with the vehicles anti-theft circuit by data only to allow remote starting of the vehicle and keeps the factory anti-theft system completely functional.
Quick-Connect Installation Kit: 3M Brand T-Tap's are included to provide fast, clean, insulated connections from the system to the vehicles wiring when direct splicing or soldering is not desired or mandatory.
LED Style Test Probe: Included in each kit is a LED style test probe that when applied clearly indicates the polarity of a wire in a vehicle. How the probe is used to verify a specific wire in a vehicle is indicated in each step of the vehicle specific installation manual. Much faster and easier to use than a Multimeter to test wires because when installing a remote car starter system your not really concerned with the voltage level of a wire in the vehicle but the polarity (i.e. + Positive or - Negative) of the wire at specific times and the LED test probe simplifies the reading by lighting a green LED to indicate a negative polarity and a red LED when a positive signal is detected.
Excellent Technical Support: Have an installation question or problem after the installation? No worry, we have an experienced and dedicated technical support team available via email or phone M-Fri. 9am-6pm & Sat. 9am-3pm Eastern. Closed Sunday & Holiday's (including Holiday weekends). And even if we are closed, you can leave a message to our technical support team and they will return your call within the next business day.
Designed and Developed in the USA: All VSS systems are designed, assembled and shipped from our Macomb, Michigan location.
Vehicle Compatibility Guarantee: Your will be asked to indicate the year, make & model of vehicle the system is being ordered for during checkout. Every order is checked by one of our technicians for vehicle compatibility/availability within 1-24 hours. With virtually 100's of different VSS kits available we probably have a VSS system available for your specific vehicle, but if in the rare event that we do not have a VSS system available for your specific vehicle, one of our technicians will notify you via email within 1-24 hours of your orders status and at the same time promptly refund your payment.
Factory Direct Authorized Dealer: AutoAlarmPro.com is a factory direct authorized dealer for every component offered on our website.
2 Year QC Warranty: AutoAlarmPro.com will directly repair or replace any part of the system that's found to fail under normal every day use for a period of 2 years from the date of delivery.
Professional Grade System: Meets or exceeds OEM requirements, is FCC compliant, ISO certified and QC bench tested before shipping.
Above Pricing Includes Shipping: Shipped USPS 3-Day Priority Mail.
General Vehicle Compatibility: The majority of vehicles equipped with Automatic Transmissions and Fuel Injection Only. Not Compatible/Available for Vehicles with a Manual Transmission or the newer In-Dash Push-to-Start Button Ignition Systems.
Includes 2 One Button Remote's: 433Mhz operating frequency that provides up to 800 feet of remote starting range.
Pre-Heat and Pre-Cools' the Vehicle's Interior: Leave the vehicles heat or AC on and the system will activate the vehicles HVAC circuit within 30 seconds after the vehicle has been remote started.
Parking Lights Confirmation: The system will flash the vehicles parking lights upon activating the remote starter and then turn them on while the vehicle is running via the remote starter.
Safety 2 Press Remote Start Activation: Pressing the button on either one of the two systems remotes within 3 seconds will activate the remote starter. This helps prevent any accidental activation of the remote starter that just one press of the remote button could do.
Shut-Down by Remote: The remote starter system can also be shut down while the vehicle is running via the remote starter within the remote start run time by pressing the remote button 2 times within 3 seconds.
Windshield Mounted Antenna: Easily mounted on the inside of the vehicles windshield directly behind the rear view mirror for optimum operating range.
6 Adjustable Remote Start Run Times: By default the system will automatically shut itself down after running the vehicle for 15 minutes but the run time can easily be changed anytime to 5, 10, 20, 45 or 60 minutes after installation by using the built-in programming button on the systems antenna.
Quick-Stop Mode: This feature allows the vehicle to stay running after the keys are removed from the ignition. Just press the button on one of the systems remotes 2 times while the vehicle is running with the key, then turn off the ignition and remove the keys from the ignition and the vehicle will remain running for the entire remote start run time. This feature is useful on occasions when you wish to exit the vehicle for a short period of time but would like to leave the engine running with the heat or AC on.
Auto Re-Start: If you live in a climate that's known to get below 0 degrees frequently and the vehicle fails to remote start on the first attempt due to a much colder engine, the system will automatically detect that the vehicle didn't start or has stalled and will automatically attempt to re-remote start the engine.
Smart Tachless Mode: For easier installation on gas engines, this newer design monitors the vehicles crank/start voltage and current levels to assure a more dependable remote start without having to run a wire out under the hood or behind the dash cluster for a direct tachometer connection.
Unlock Capability: Included optional connection for vehicles that have factory keyless entry systems that don't work when the engine is running with the key. Making this connection will allow you to press & hold the button on the systems remote to unlock the vehicles doors while its running via the remote starter.
Built-In Valet/Service Mode: Temporarily turn off the remote starter system by turning the ignition on and then holding in the button on the systems antenna until the LED on the antenna turns on, then just turn the ignition off. This will temporarily disable the systems remotes to prevent any accidental remote activation when the vehicle is being serviced.
Safety Brake Input: If you enter the vehicle and step on the vehicles brake pedal before turning the ignition on with a key, the remote starter will immediately shut down.
Diesel Engine Compatible: Direct tachometer input for diesel engine's and glow-plug warming delay. The delay crank time settings can be adjusted for a 10, 15, 20 or 45 seconds delay before start (10 seconds is the default time).
Every 2 or 3 Hour's Remote Start Timer: The system can be set to auto start the vehicle every 2 or 3 hours over a 48 hour period. This feature is especially useful in very cold climates where the only means to keep the engine fluids warm is to start the engine.
Advanced DATA Port (a.k.a. D2D): Significantly reduces the amount of wiring required when installing any needed anti-theft bypass interface kit.
Under Hood "Vehicle Equipped with a Remote Starter System" Sticker: Bright yellow sticker to be placed under the vehicles hood.
General Vehicle Compatibility: The majority of vehicles equipped with Automatic Transmissions and Fuel Injection Only.
Not Compatible/Available for Vehicles with a Manual Transmission or vehicles equipped with In-Dash Push-to-Start Button Ignition Systems.
From Nicalo G. in Eldorado TX: "Nice set-up, very easy to follow installation instructions, very happy with system"
From Brian C. in Atlanta GA: "The best do it yourself remote starter kit you will find anywhere! I was don in under 2 hours!"
(Installed a CA-4053 VSS into a 2006 Silverado)
The Code Alarm CA-4553 VSS (Vehicle Specific System) Remote Starter Kit has all the same features as the CA-4053 VSS above but with the upgraded addition that one of the remotes has a 2-Way confirmation feature: The 2-Way remote will flash 2 times when the remote start is activated indicating that the signal from the remote has reached the vehicle and the vehicle will remote start, but if the vehicle is out of range the remote will flash 4 times indicating that the vehicle is out of range.
NOS (New Old Stock Clearance) The Code Alarm CA-4050 VSS (Vehicle Specific System) Remote Starter Kit has the same features as the CA-4053 VSS above but without smart tachless mode, door unlock output and an average remote start range of 500 feet.
If you have any questions regarding the CA-4050, CA-4053 VSS or CA-4553 VSS above, please submit the form below and an AutoAlarmPro.com technician will reply within 1-24 hours. Thank you.
DISCLAIMER: All systems and/or parts provided by AutoAlarmPro.com include all the parts and information confirmed throughout the car alarm & remote starter industry to successfully provide the features & functions of the device as described when properly installed. AutoAlarmPro.com does not guarantee, nor imply that "anyone" can perform any required installation. Our VSS systems are stated "easier" to install due to the Vehicle Specific System (VSS) designed platform that significantly reduces the time, labor and additional parts & information needed to perform the work and should not be misconstrued as an "easy" or "no-brainer" "anyone-can-do-it" interpretation, presentation or product. No returns or refunds on applied electronic parts, warranty repair or replacement only. Electronic components still in its delivery state can be returned for refund within 30 days from date of delivery, restocking fee may apply. Contact Auto Alarm Pro.com for details or return authorization.
AutoAlarmPro.com/RemoteStarterPro.com 2002-2014All Rights Reserved All Products & Pricing are Subject to Change Without Notice
Online Since 2002. Located in Port Huron, MI. 48060