Add-On Shock Sensor to Factory Alarm
w/Warn-Away Sensing Feature
Description: Add-On Shock Sensor for Factory Installed Alarm Systems
This Impact Sensor is designed to trigger your vehicles factory alarm when a set amount of impact is made to your vehicle. The sensors sensitivity is easily adjustable from light to heavy "vibration" detection, with the additional option to also provide a light-impact warn away alarm. This sensor works on its built-in auto-timer that automatically turns the sensor ON once the vehicles ignition has been turned OFF and the factory alarm has been armed.
In addition, this sensor also includes a "surface" mounted (No drilling any holes in the dash) RED flashing LED that indicates that the sensor is ON. Also includes a built-in ON/OFF/VALET button for when you want to turn the sensor temporarily OFF.
Designed to work with almost any vehicle with a factory installed alarm system
Built-in shock sensor with pre-warning beeper
Compatible with all factory alarm trigger polarities
Includes: LED, LED holder, valet override switch and relay for universal installations
Vehicle Specific Installation Instructions
1 Year Warranty
Optional choice of 1 extra sensor: Digital Tilt Sensor, alarms your tires and wheel's or Glass Break Detector (Sold separately. Option offered during checkout).
Order will be checked for vehicle specific compatibility before shipping.
TECH NOTE: How to be sure if your vehicle has a factory installed alarm system: Roll down the drivers door window. Exit and close the drivers door. Lock the vehicles doors using the factory remote. Allow at least 1-2 minutes to pass. Reach in through the open window and open the drivers door from the inside. If the vehicle has a factory alarm system, the vehicles horn will start pulsing OR another way is to open the vehicles hood, close all the vehicles door's and find the vehicles hood pin-switch commonly mounted on a bracket somewhere under the hood on the inner fender. Push down on the pin-switch and hold it down, then lock the doors with the factory remote, wait a minute or two then release the pin-switch. If the vehicle has a factory alarm system, the vehicles horn will start pulsing. If your vehicles horn does not sound, your vehicle is not equipped with a factory installed alarm system and we recommend the X1 system below to provide the features your looking for.
DISCLAIMER: Systems provided by AutoAlarmPro.com include all the parts and information confirmed throughout the car alarm & remote starter industry to successfully provide the features & functions of the device sold when properly installed. AutoAlarmPro.com does not guarantee, nor imply that "anyone" can perform any required installation. Our VSS systems are stated "easier" to install due to the VSS designed platform that significantly reduces the time, labor and additional parts & information needed to perform the work and should not be misconstrued as an "easy" or "no-brainer" "anyone-can-do-it" interpretation, presentation or product. No returns or refunds on applied electronic parts, warranty repair or replacement only. Electronic components still in its delivery state can be returned for refund within 30 days from date of delivery, restocking fee may apply. Contact Auto Alarm Pro.com for details or return authorization.
AutoAlarmPro.com 2002-2013All Rights Reserved
All Products & Pricing are Subject to Change Without Notice
AutoAlarmPro.com is Independently Owned & Operated
Online Since 2002