Great Tester to use for Car Alarm & Remote Car Starter Installations!
A LED Style 12 Volt Test Probe used to identify the polarities (positive or negative) of the wires needed for any car alarm or remote car starter installation. Faster & Easier to use then a Multi-Meter. Same Test Probe included in all our VSS Systems.
- Easy to apply and understand: When installing auto alarms or remote starter systems, you don't need to know the wire's voltage level as a multi-meter indicates, but just the polarity and if you have the multi-meters probes connected in the wrong direction, it will indicate the wrong polarity. A LED style test probe eliminates this concern and possible confusion.
- Only 1 connection needed to operate
- Red & Green LED Polarity Indicators: Red LED indicates a Positive Polarity (+) and a Green LED indicates a Negative Polarity (-)
- Easy to Use: Connect the test probes alligator clip to a chassis ground when probing for a specific wire with a positive polarity or connect it to constant power when probing for a specific wire with a negative polarity.
- Pointed Tip to directly probe though the wires insulation
- High Impedance Tip: Help prevents triggering of vehicle components when probing the circuits wires
- Full Size, Medium Duty Quality/Applications