Pro Series CA-310 VSS Add-On Security Upgrade for Factory Keyless Entry Systems
Upgrade Alarm System that Uses the "Factory Installed" Remote Controls (AKA "Key Fobs")
All Door Protection: The CA-310 will Sound the Systems Siren (or the vehicles horn) when any of the vehicles doors are opened.
Start-Kill/Anti-Theft Circuit: If the alarm was triggered, the system would prevent the vehicle from being "hot-wired" or even started with one of the vehicles keys. (Included Installer Option)
Dual-Zone Impact Sensor: The system provides a "Shock" sensor that will detect any light to heavy impacts made to the vehicle that will trigger the alarm system. (Installer sensitivity adjustable)
Flashing Parking Lights: The system will flash the vehicles parking lights whenever the factory remotes are used and when the system is triggered.
125 db Siren or Vehicles Horn Installer Choice: System can be installed using the supplied Siren or utilize the vehicles existing horn to simulate a factory installed system and at the same time provide a quicker installation.
Emergency Bypass Button: The security system can be disarmed without the use of the OEM transmitter. This is necessary, since you would need the ability to shut down the alarm system if the
transmitter is lost or its battery fails.
System-to-Vehicle Specific Installation Manual: Step-by-Step, wire-to-wire installation guide that indicates exactly what wire from the system goes to what wire in your vehicle and where that wire is.
Complete Installation Kit: All the Connectors, Wiring, Hardware, Split-Loom etc. needed to Complete the Installation is Included: Any Relays, Diode's and/or Resistor's Needed for the Specific Vehicles Installation is Supplied and Pre-Wired In. Also included with every VSS order: An Air-Bag & Computer Safe LED Style Test Probe is also provided to assist you in verifying the needed wires in the Vehicle. Includes complete instructions on how to use it to verify each & every wire needed to connect to in the vehicle.
Installer Friendly Programmable Feature's: This system has several programmable features that can be changed based on a specific vehicle or a customer's preference. Programmable features can be changed using a bank of 7 dip switches located on the side of the control module. Change's to a setting is easily made by flipping a dip switch to the OFF or ON position using a small screwdriver or pick. Programmable option example's: Passive or Active arming ON/OFF, Siren or Vehicle Horn ON/Siren Horn/OFF, Entry Delay ON/OFF and more.
2 Year Limited Warranty: Click on above image for details.
Description: Vehicle Specific Shock Sensor Add-On for Factory Installed Alarm Systems
This Impact Sensor is designed to trigger your vehicles factory alarm when a set amount of impact is made to your vehicle. The sensors sensitivity is easily adjustable from light to heavy "vibration" detection, with the additional option to also provide a light-impact warn away alarm. This sensor works on its built-in auto-timer that automatically turns the sensor ON once the vehicles ignition has been turned OFF and the factory alarm has been armed.
In addition, this sensor also includes a "surface" mounted (No drilling any holes in the dash) RED flashing LED that indicates that the sensor is ON. Also includes a built-in ON/OFF/VALET button for when you want to turn the sensor temporarily OFF.
Vehicle Specific
OEM Quality
Easy 4-Wire Hook-Up: (1) Constant Power (2) Ground (3) Ignition ON Power (4) Trigger Input
Step-by-Step Vehicle Specific Wiring Guide
Installation/Connector Kit
2 Year Replacement Warranty
2 X Chapman "Vehicle Security" Warning Window Stickers
Tech Support
Vehicle Compatibility Guarantee
TECH TIP: How to be sure if your vehicle has a factory installed alarm system: Roll down the drivers door window. Exit and close the drivers door. Lock the vehicles doors using the factory remote. Allow at least 3 minutes to pass. Reach in through the open window and open the drivers door from the inside. If the vehicle has a factory alarm system, the vehicles horn will start beeping. If your vehicles horn does not start pulsing, we recommend the Code Alarm CA-310 system below to provide the features your looking for.
