Description:
Vehicle Specific Shock Sensor Add-On for Factory Installed Alarm Systems

This Impact Sensor is designed to trigger your vehicles factory alarm when a set amount of impact is made to your vehicle. The sensors sensitivity is easily adjustable from light to heavy "vibration" detection, with the additional option to also provide a light-impact warn away alarm. This sensor works on its built-in auto-timer that automatically turns the sensor ON once the vehicles ignition has been turned OFF and the factory alarm has been armed.

In addition, this sensor also includes a "surface" mounted (No drilling any holes in the dash) RED flashing LED that indicates that the sensor is ON. Also includes a built-in ON/OFF/VALET button for when you want to turn the sensor temporarily OFF.

• Vehicle Specific
• OEM Quality 
• Easy 4-Wire Hook-Up: (1) Constant Power (2) Ground (3) Ignition ON Power (4) Trigger Input
• Step-by-Step Vehicle Specific Wiring Guide
• Installation/Connector Kit 
• 2 Year Replacement Warranty
• 2 X Chapman "Vehicle Security" Warning Window Stickers 
• Tech Support
• Vehicle Compatibility Guarantee

TECH TIP: How to be sure if your vehicle has a factory installed alarm system: Roll down the drivers door window. Exit and close the drivers door. Lock the vehicles doors using the factory remote. Allow at least 3 minutes to pass. Reach in through the open window and open the drivers door from the inside. If the vehicle has a factory alarm system, the vehicles horn will start beeping. If your vehicles horn does not start pulsing, we recommend the AUTOPAGE FA-110 system below to provide the features your looking for.